Computer Audio Asylum Music servers and other computer based digital audio technologies.

---

[ Follow Ups ] Thread: [ Display  All  Email ] [ Computer Audio Asylum ]

---

[ Alert Moderator ]

---

Re: Yes, enable is checked.

Posted by Presto (A) on January 22, 2007 at 00:10:45

In Reply to: Yes, enable is checked. posted by soldermizer on January 21, 2007 at 13:18:48:

Sorry...

My brain was off when I posted that last reply.

Your manual is available here:

http://ccftp.creative.com/manualdn/Manuals/TSD/2361/Aud2Plat.pdf

Turn to page 38.

Notice that there are both analog AND digital connections from the drive to the card. Which one(s) do you currently have connected?

Now - since you have the box checked that I made you go check, you have the drive enabled for digital playback over the IDE cable.

Have page 67 a read under "inputs" - it says right there: CD digital spdif input via 2 pin molex connector on the card....

Maybe you have analog connected and not digital - and that is why nothing shows up when you turn up the volume for that input.

OR maybe you need to REMOVE that checkbox - maybe enabling digital over IDE DISABLES the digital output on the drive. I doubt it - but if you can't get the digital out on the drive working, then I would try that.

One question though... WHY???

CHeers,
Presto

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---