Home OTL Asylum

OTL, Output Transformerless Amplifier User Group.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ OTL Asylum ]
[ Alert Moderator ] [ Edit ] [ Delete ]

RE: Possible tweak

67.117.67.210

Lew,

I am pretty sure Ralph said they were using 1 ohm in series with the caps in the output supplies. I also think he said they were only on the plus side of the caps, where as Paul had resistors on both sides. Yes, Paul was using a .51 and then .21 the rest the way to the output. This was several years ago when I talked to Ralph about that so you might want to double check with Ralph to be sure.

Lew, I am looking at the schematic on my M60's and I don't see a 1k ohm resistor in the output supply any where. Just exactly where are they located---off of what tube, etc. ?? I have a couple of 600 ohm resistors in series with the speaker outputs coming off the power supply caps. Is this what you are talking about ??

This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]