In Reply to: Re: Translation posted by tubevibb on September 18, 2006 at 13:18:53:
So, you are now using a 500R resistor bypassed by a 16uF capacitor in parallel with an 0.86uF capacitor, for a total of 16.86uF of capacitance. Is that correct? Once again, I would ask how you calculated the amount of capacitance that would be best or if you are just doing this by trial and error (which is perfectly OK, too). To my ears, many of the B&W speakers of the past had a fairly peaky sounding tweeter, with some amplifiers in some rooms, etc. Maybe that is what you are dialing out with your bypass caps.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Translation - Lew 14:45:47 09/18/06 (1)
- Re: Translation - tubevibb 15:36:54 09/18/06 (0)