You might want to weed that one out..

OTL Asylum

OTL, Output Transformerless Amplifier User Group.

In Reply to: tube temps posted by Satelliteman on August 4, 2006 at 00:43:27:

The 1 ohm resistor will help somewhat to offset differences between the tubes but some will draw more current than others and if they are far enough off they may not last long. The newer Atma amps use resistors in the cathode leg instead of the plate circuit and should help spread out the tube differnces better.

Dave

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Follow Ups Full Thread

Topic - tube temps - Satelliteman 00:43:27 08/04/06 (8)

What DaveInVA said... - Lew 08:39:09 08/04/06 (6)

Re: What DaveInVA said... - Satelliteman 16:14:41 08/05/06 (5)

Re: The newer amps - Ralph 08:18:24 08/07/06 (4)

Hi, Ralph. - Lew 12:20:42 08/07/06 (3)

Re: Cathode output - Ralph 12:37:27 08/07/06 (2)

Re: Cathode output - tubevibb 08:12:28 08/22/06 (0)

Re: Cathode output - Satelliteman 23:43:24 08/07/06 (0)

You might want to weed that one out.. - DaveInVA 08:22:15 08/04/06 (0)

Follow Ups

You might want to weed that one out.. - DaveInVA 08:22:15 08/04/06 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.