In Reply to: Atma-Sphere M60mkII.3 with 6 ohm speaker?? posted by 12georgea on September 16, 2005 at 00:30:05:
Try to find an impedance curve for the speaker in question. Not all "6-ohm" speakers are alike in their drive-ability. For example, if the impedance at mid- and/or low frequencies is at or above 6 ohms and not lower than 6 ohms except in the treble, i.e., @ >2KHz, you may be OK. But the overall rating of 85 db efficiency suggests that the match would be marginal without Zeros.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Atma-Sphere M60mkII.3 with 6 ohm speaker?? - Lew 10:42:10 09/21/05 (0)