|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: Re: Requesting sanity check on DIY 600 ohm terminators posted by JerryS on May 10, 2003 at 13:52:13:
Your post suggests that you use 600-ohm resistors between pins 2 and 1 and between pins 3 and 1. Thus your MP3 is looking into a 1200-ohm load. Is this correct? If so, have you or anyone else experimented with other loads lower than the 200K-ohm "high impedance" load seen with balanced connection? In other words, if 1200 ohms sounds better than 600 ohms, what about 2400 ohms, etc? I wonder whether your observation that 1200 ohms sounds better than 600 ohms, for the MP3/M60 combo, relates in any way to the fact that the MP3 will have a slightly higher output Z compared to an MP1.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- 1200 ohms? - Lew 07:11:46 05/12/03 (5)
- Re: 1200 ohms? - JerryS 07:41:14 05/12/03 (4)
- Re: 1200 ohms? - Lew 10:10:34 05/12/03 (3)
- Re: 1200 ohms? - Al Sekela 09:14:40 05/13/03 (2)
- Re: 1200 ohms? - Lew 12:39:38 05/13/03 (1)
- Re: 1200 ohms? - Al Sekela 19:35:34 05/13/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
