MP-3: What is the maximum gain of the Phono stage?

OTL Asylum

OTL, Output Transformerless Amplifier User Group.

0

Hi All,
Well, I'm going to be aquiring an MP-3 preamp (Thanks Todd). Can anyone tell me what the maximum gain (in db) is for the phono section? Since it uses all 12at7 type tubes, I assume one could sub in say a 12ax7 for more gain (if you could find a quiet, non-microphonic well matched pair). I ask because it looks like minimum cartridge output should be about .5mv and I'm considering a .4mv MC cartridge.
Also, is there any way/need to set capacitance on the MP-3 phono section?
Thanks,
Erik

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

Topic - MP-3: What is the maximum gain of the Phono stage? - Erik 11:27:11 01/09/03 (3)

Re: MP-3: What is the maximum gain of the Phono stage? - mark 06:41:39 01/14/03 (0)

Re: MP-3: What is the maximum gain of the Phono stage? - Travis 18:10:48 01/10/03 (0)

Re: MP-3: What is the maximum gain of the Phono stage? - shep 12:58:58 01/09/03 (0)

You can not post to an archived thread.