|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: Bypass Capacitors, Output tubes posted by Allan on June 6, 2002 at 08:47:28:
I'm had good success bypassing the output supply caps with 2 to 3 uF and bypassing the driver supply caps with 1 uF caps.The 5998 has a mu of 5.4, compared to 2 with the 6AS7G. It has been upgraded to 15 watts plate dissipation, compared to 13 with the 6AS7. Still, it doesn't like plate voltages must past 100 and still is not recommended in fixed bias service. I think you were wise passing on these tubes.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Bypass Capacitors, Output tubes - mark 17:58:14 06/06/02 (3)
- Re: Bypass Capacitors, Output tubes - Steve H 08:48:17 06/10/02 (2)
- Re: Bypass Capacitors, Output tubes - Allan 02:40:29 06/11/02 (0)
- Re: Bypass Capacitors, Output tubes - mark 11:13:40 06/10/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
