Re: M60 bias problem/ no sound from the amp...

OTL Asylum

OTL, Output Transformerless Amplifier User Group.

0

In Reply to: Re: M60 bias problem/ no sound from the amp... posted by JF on September 27, 2001 at 19:05:07:

Check your fuses first, I bet that is your 'no sound' problem.
As for bias problem, you probably need to swap your tubes around and balance them out. First check them for shorts, to make sure you have 8 good tubes.(the fuse may have blown if a tube shorted out.)
Go read the care and feeding of new tubes directions in the FAQ section of this site:
http://www.condor-connection.org/asog/faq/6as7g/index.html
That will help clarify how to do it.

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

Follow Ups Full Thread

Topic - M60 bias problem - J-F 18:42:44 09/27/01 (3)

Re: M60 bias problem/ no sound from the amp... - JF 19:05:07 09/27/01 (2)

Re: M60 bias problem/ no sound from the amp... - Harry 19:17:33 09/27/01 (1)

Re: M60 bias problem/ no sound from the amp... - J-F 19:22:47 09/27/01 (0)

Follow Ups

Re: M60 bias problem/ no sound from the amp... - Harry 19:17:33 09/27/01 (1)

Re: M60 bias problem/ no sound from the amp... - J-F 19:22:47 09/27/01 (0)

You can not post to an archived thread.