|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
|
|
OTL Asylum OTL, Output Transformerless Amplifier User Group. |
|
In Reply to: How many feet of hook up wire posted by BryanP on October 10, 2000 at 13:53:03:
The factory supplies 33 feet of 20 gauge wire with each kit and Ralph says that's more than enough if the wire is properly routed. I used close to 40 feet of 20.5 gauge Cardas wire when I rebuilt my M60s. The Teflon insulation on the Cardas is nice in that it tolerates a lot of heat from the soldering iron, but since the individual strands are enameled, you MUST use a solder pot to tin the ends. Even an 800° soldering iron did not work well to properly tin the wire.IMHO The Cardas 20.5 gauge wire is good, but probably not better than the 20 gauge wire supplied by Atma-Sphere. I can't comment on the 15.5 gauge except to say it's probably somewhat more difficult to work with.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: How many feet of hook up wire - George M 14:38:37 10/10/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
