Question for Mark

OTL Asylum

OTL, Output Transformerless Amplifier User Group.

0

As I was nearing completion of my M-60MKII kit I decided to add the chokes to the driver supply. the diagram that came with the chokes did not include any instructions so I called Ralph at Atma-sphere. He said to mmove the connection of the 2.9K resistor from lug 3 of the 8 position strip to lug 1 and to attach the new filter cap to the same lug. Also move to the same lug the jumper wire from the lug strip mounted on V2that was origionally soldered to lug 3 of the 8 pos. strip.Finally I was instructed to remove the jumper from lugs 6 and 8 of this same 8 pos.strip.(I assume the choke is replacing the jumper in the circuit.) Is this all I need to change from the original circuitry as per the assembly manual rev.5.0, dated Aug.1999? I appreciate your suggetions or anyone else's for that matter.Thanks!

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

Topic - Question for Mark - Garland 18:20:23 05/24/00 (1)

Re: Question for Mark - mark 09:58:46 05/25/00 (0)