I've just bought a pair of M-50s with the
front indicator disabled... I opened the box
and checked the test/operate switch. I verified
that the switch is always shorted to the operate
mode. I believe this is the reason for not being
able to read the bias on the meter. Is my analisys
correct? Should I replace the switch? Should the
dc/bias read be done with this switch opened?
TIA.Luis
This post is made possible by the generous support of people like you and our sponsors:
Topic - Problems with the M-50 - Luis Ponce de Leao 19:54:49 02/03/99 (1)
- Re: Problems with the M-50 - mark gilmore 10:10:49 02/05/99 (0)