|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: RE: Q re: foam in tomservo's flat baffle project posted by tomservo on November 12, 2024 at 06:47:06:
I hope continued questions on this aren't asking too much.
Doing a little noodling around, enclosing the rear of the driver with BassBox as it already has the T&S data. Of course it's calculating the response with the baffle dimensions for the prism.
My question is , Will the larger baffle simply extend low frequency or will it create a hump at the bottom end of Bassbox's calculated range?
If that's how it works then in short, how should I approach design of the rear enclosure?
(Incidentally, Green trace was about 2 litre volume, Red is the 10 litre)
Thanks !
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- About enclosing the rear. - Ian L 20:48:20 11/12/24 (6)
- RE: About enclosing the rear. - tomservo 08:42:32 11/13/24 (5)
- RE: About enclosing the rear. - rebos123 13:16:58 11/23/24 (3)
- RE: About enclosing the rear. - tomservo 13:59:06 11/24/24 (1)
- RE: About enclosing the rear. - rebos123 14:15:18 11/24/24 (0)
- RE: About enclosing the rear. - claudej1@aol.com 16:32:49 11/23/24 (0)
- back soon with results , Thanks ! (no text) - Ian L 09:50:16 11/15/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
