|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: Perforated speaker cabinets posted by Bill the K on June 23, 2024 at 04:42:45:
The simplest way to control panel damping is constrained layer damping which is 2 layers for each panel glued together with a glue that never totally hardens. The panels can be the same material or different ones. A simple one going back over 50 years to the old IMF Monitor speakers is to finish a wood(MDF today) panel with Formica(or similar material) with the non setting glue.
Rigidity in this case would usually be bracing perpendicular to the walls, preferably close together, say 4 to 6 inches.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Perforated speaker cabinets - hahax@verizon.net 19:27:21 06/29/24 (2)
- RE: Perforated speaker cabinets - Bill the K 01:04:10 06/30/24 (1)
- RE: Perforated speaker cabinets - hahax@verizon.net 19:27:30 06/30/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
