In Reply to: RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn posted by Rod M on January 3, 2024 at 13:00:02:
Your right about length, that defines the lowest F it can have any gain over a direct radiator.
You posted a drawing of an old friend, the A-7. I wasn't sure i had the measurements but i found them.
In 2003 i rebuilt a pair of them for a good cause and he didn't care what i did.
If i have seen anything in my life, it is that driver properties and the ability to model things have actually made a pretty big and for me giant difference at work and worth considering drivers when building.
So here i have posted that Altec A-7 with the normal drivers and ones i picked.
For hf it's a bms 4550 an excellent driver and keeping it at least partly Lansing a JBL2226 which i had on hand and looked good at the time.
Notice the difference, on the low end and top end a very noticeable diffidence in raw bandwidth (there is no crossover involved here, these were measurements for figuring that out).
When done, this was a considerably wider bandwidth and flatter speaker than it started and sounded good.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn - tomservo 12:22:12 01/07/24 (6)
- RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn - claudej1@aol.com 10:15:53 01/10/24 (0)
- RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn - claudej1@aol.com 10:08:17 01/10/24 (1)
- RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn - tomservo 09:44:27 01/11/24 (0)
- RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn - tomservo 12:25:16 01/07/24 (0)
- RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn - tomservo 12:24:14 01/07/24 (1)
- RE: Hornresp 1st pass - comments/critiques welcome. 40hz "L" horn - claudej1@aol.com 10:10:19 01/10/24 (0)