In Reply to: Super Tweeter Suggestions posted by escape2cfc on October 18, 2023 at 09:32:42:
far below was this;
So you have a mid only version of this coax driver.
https://images.static-thomann.de/pics/atg/atgdata/document/specs/bms_4592nd_t.data.pdf
In that case, you might want to try the B&C version of that driver WITH the hf unit, also a coax driver with a crossover that is easier to manage than the with the coax BMS. Both have a 1.4 inch and 2 inch exit coax version.
https://bcspeakers.com/en/products/coaxials-hf/2-0/8/dcx462-8
Both the bms and B&C have an HF section that gets up all the way into the top octave where many, especially large horn drivers don't/can't reach.
It would be highly desirable if you can measure what you have as you go along. Frequency response (aside from signal absence) is the most obvious thing we hear and horns are very rarely flat on their own.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Super Tweeter Suggestions - tomservo 11:00:24 10/29/23 (3)
- RE: Super Tweeter Suggestions - escape2cfc 11:26:16 10/29/23 (2)
- RE: Super Tweeter Suggestions - tomservo 11:05:59 10/30/23 (1)
- RE: Super Tweeter Suggestions - escape2cfc 12:00:27 10/30/23 (0)