Phasing horn with a woofer

High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

70.82.103.141

What's the best way to do mechanical phasing of a horn with a woofer.
I have an Onken with an Altec 416-8A . For 600hz and up. I use an Altec 288c coupled to a 1005B horn.
Some peoples told me that the phasing in a typical woofer is taken near 1/3 of it's outside deph (from the accordeon suspension) Is it right ?
For a compression driver like the 288C coupled with to a 1005 B multicell, Where do I take the measurement (phasing point) to align the horn with the woofer ?
If it is near the diaphragm, the horn will be a lot in front ot the cabinet.
My electronic crossover is a 12 db/oct. The polarity of the horn is inversed.
Thanks

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Topic - Phasing horn with a woofer - legarem 13:56:08 04/16/07 (2)

Re: Phasing horn with a woofer - Duke 15:31:46 04/16/07 (0)

Re: Phasing horn with a woofer - stuck.wilson@gmail.com 15:09:07 04/16/07 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.