|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: RE: Questions About Your Experience Rope Caulk On Horns posted by freddyi on August 23, 2007 at 16:35:56:
I've found to really knock out the ringing in a 511b, the 3 welds in the sectoral vanes have to be cut. The amount of external damping then required to eliminate self resonance is dramatically reduced. I applied a few coats of rubberized automotive under-coating on the external surfaces and filled in the cut welds with automotive seam sealer before repainting the horn. Looks like a factory new horn but no ringing. Rope caulk is very effective at damping too but I hate the look on an exposed horn.
-Ed
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Questions About Your Experience Rope Caulk On Horns - Ed Fallon 06:22:36 08/26/07 (1)
- RE: Questions About Your Experience Rope Caulk On Horns - Tom Brennan 13:32:55 08/26/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
