In Reply to: RE: Bill, thanks, that was part of the answer I was looking for. posted by Dan_ed on August 6, 2007 at 11:46:31:
definitely look around for an impedance graph of the 2441... i'd bet you're stressing that diaphragm pretty hard with a 40uF cap, because chances are good it's not running at nominal impedance down at 500 hz too (which i'm betting is your theoretical crossover point).
are the mids sounding particularly grating and forward? if so-- you're probably overlapping like mad with your woofer, and you're suffering major cancellations and wierdness- not to mention distortion!
d.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Bill, thanks, that was part of the answer I was looking for. - stuck.wilson 14:48:17 08/06/07 (3)
- RE: Bill, thanks, that was part of the answer I was looking for. - Dan_ed 19:53:39 08/06/07 (2)
- RE: Bill, thanks, that was part of the answer I was looking for. - stuck.wilson 04:39:34 08/07/07 (1)
- RE: Bill, thanks, that was part of the answer I was looking for. - Doug Flynn 00:20:02 08/08/07 (0)