In Reply to: EV Aristocrat inside bafle dimention posted by fin1bxn@msn.com on August 5, 2007 at 04:54:59:
Yes, with the caveat that the cuts ideally need to be at a 45 deg angle. Back when I used a handsaw though, I didn't bother if they weren't visible, instead filling the seam with a glue/sawdust mixture. Don't know the dims, so either reverse engineer it if you're math savvy or do as I did and make cardboard templates as required.
Anyway, the DIY manual gives an exploded view and assembly sequence:
Loud is Beautiful if it's Clean!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: EV Aristocrat inside bafle dimention - GM 09:23:20 08/05/07 (4)
- RE: EV Aristocrat inside bafle dimention - shimmy-shimmy coco bop - freddyi 09:28:45 08/05/07 (3)
- RE: EV Aristocrat inside bafle dimention - shimmy-shimmy coco bop - GM 10:21:31 08/05/07 (2)
- RE: EV Aristocrat inside bafle dimention - shimmy-shimmy coco bop - freddyi 12:09:41 08/05/07 (1)
- RE: EV Aristocrat inside bafle dimention - shimmy-shimmy coco bop - GM 14:02:25 08/05/07 (0)