If you string two capacitors together in series you add the capacitance to find you total, correct? When bypassing a capacitor, are you still adding capacitance or is it volage? Since I was really only thinking about bypassing the lower frequency cap (a 68 uf cap that is too expensive to use anything but a Solen) I have read that is the least important of the three, should I bother?
This post is made possible by the generous support of people like you and our sponsors:
Topic - Bypassing Speaker Caps - Paully 06:58:46 07/16/07 (15)
- Is this for the Klipsch? - Russ57 16:08:21 07/16/07 (5)
- It was quite clear - Paully 17:53:05 07/16/07 (4)
- That is a very smart idea - Russ57 11:13:15 07/17/07 (3)
- It only gets worse - Paully 19:46:01 07/17/07 (2)
- RE: It only gets worse - Jeff 17:27:37 07/18/07 (0)
- DCR= DC resistance as measured by an ohm meter - Russ57 17:20:50 07/18/07 (0)
- RE: Bypassing Speaker Caps - stuck.wilson@gmail.com 08:16:07 07/16/07 (2)
- Different sonic effects - Paully 09:02:45 07/16/07 (1)
- RE: Different sonic effects - jcmjrt 13:50:51 07/16/07 (0)
- Nope! - Russ57 08:12:55 07/16/07 (5)
- That confuses me - Also any recommendations - Paully 09:06:00 07/16/07 (4)
- RE: That confuses me - Also any recommendations - corerosin 13:24:31 07/16/07 (0)
- RE: That confuses me - Also any recommendations - Hornlover 10:57:54 07/16/07 (2)
- A little reminder that always helps me - Dan_ed 17:21:30 07/16/07 (0)
- Thanks (nt) - Paully 11:46:51 07/16/07 (0)