|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
|
|
High Efficiency Speaker Asylum Need speakers that can rock with just one watt? You found da place. |
|
In Reply to: 150Hz is too high. posted by Mats Gunnars on March 12, 2007 at 19:46:14:
"Try setting the plate amps at 80-100Hz, polarity at 180 degrees as Kurt sez and then dial in volume to taste. "Crossed at 80-100 HZ (as my subwoofers are set when running with my original JE Labs OB's) there appears to be a big hole and an obvious leanness that does not fill in until the crossover knob on the Bash amps are pegged at 150 HZ. This is definately going to require much more experimentation to get corrected.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 150Hz is too high. - chopper87@aol.com 07:28:53 03/13/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
