I've decided to go ahead and build a from scratch 2-way open baffle speaker. And since I'll have six weeks to research and ask around about components I thought I'd start here and try and tap you gentleman's considerable knowledge base.For an inexpensive woofer how do these Eminence drivers look? Which of them would work best in your opinion.
Eminence Beta 15A
Qts. 0.58
Fs. 35hz
Spl. 98.2
X-max 4.0mm
crossover point 3.7khzEminence Alpha 15A
Qts. 1.26
Fs. 41hz
Spl. 97.0
X-max 3.8mm
crossover point 3.5khzEminence Delta 15A
Qts. 0.53
Fs. 40hz
Spl. 100.0
X-max 2.7mm
crossover point 4khzEminence Sigma Pro 18A
Qts. 0.29
Fs. 28hz
Spl. 99.0
X-max 6.1mm
crossover point 2.4khzI figure I'll choose a tweeter to match whatever woofer I decide on.
Man! this was hard to write, the reason I have 6 weeks off is due to back surgery and the pain medicine they gave me is just hammering me. ;)
Thanks Guys.
Rick
This post is made possible by the generous support of people like you and our sponsors:
Topic - High effeciency open baffle woofer? - Rick Barton 09:22:55 02/08/07 (14)
- Considered the Dayton IB Woofer? - Dr Deville 14:42:03 02/08/07 (3)
- Re: Considered the Dayton IB Woofer? - hitsware 03:24:42 02/09/07 (2)
- I Get A Hump with the Goldwood. ;^) Re: Considered the Dayton IB Woofer? - Dr Deville 15:17:50 02/09/07 (1)
- Re:How wide is your baffle ? - hitsware 20:04:48 02/10/07 (0)
- Re: High effeciency open baffle woofer? - nullspace 11:20:58 02/08/07 (5)
- I approve of the fullranger + 15" suggestion. - hollowboy 20:32:12 02/08/07 (2)
- Raising the Qts of a woofer mechanically - Christopher Witmer 21:05:28 02/08/07 (1)
- Cool idea for cheap drivers. - hollowboy 22:17:51 02/08/07 (0)
- Why the Alpha over the other John? - Rick Barton 12:23:16 02/08/07 (1)
- Re: Why the Alpha over the other John? - nullspace 13:21:43 02/08/07 (0)
- Questions first, answers later - Russ57 09:35:56 02/08/07 (3)
- Russ, I was thinking that with the shown........... - Rick Barton 12:13:49 02/08/07 (2)
- Check out this link - Russ57 14:02:32 02/08/07 (0)
- I for got the Link..... - Rick Barton 12:19:05 02/08/07 (0)