In Reply to: Dead Shanling T200 posted by carlschenke@bellsouth.net on August 11, 2005 at 20:34:27:
...one of the cheapo WAY UNDERRATED connectors in the tube heater line has finally cooked itself - heating/burning the plastic holding the connections in place, and hence they can no longer transfer the heater current to the tubes.That happened to the one I had in for investigation to see if it was something we wanted to Upgrade - only it took just a week to crap out.
The quick cure was to solder the wires in place rather than rely on a connector
Is there still an output from the non-tube outputs?
Allen
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Most likely... - Allen Wright 11:33:42 08/12/05 (2)
- Re: Most likely... - carlschenke@bellsouth.net 15:26:31 08/12/05 (1)
- Can I assume that it's as relatively simple and inexpensive as it sounds? - Allen Wright 07:54:35 08/13/05 (0)