In Reply to: RE: SET headphone amp without hum? posted by aarocks on August 7, 2016 at 10:15:02:
Some amps have a reputation for being "noisy" and/or more sensitive to ground loop issues than others. Humming can also be cause by things like internal wires or parts that are loosely attached.A few years back and seemingly out of nowhere, my tube phono preamp developed a hum. When I opened up the case, I discovered that one of the input cable terminal nuts had loosened up. After I untwisted the wire and tightened the internal nut, the hum disappeared. Another time, I discovered that the phono section in an integrated amp that I had bought on the used market had a terrible hum. I looked inside and noticed that the casing internal ground wire attachment was painted metal rather than bare metal. After I scraped the black paint residue away and re-tightened the terminal nut, no more hum...
So, sometimes it's worth opening up the case and checking things out. Or if the amp is new and/or still under warranty, consider sending it back for a checkup.
If all else fails try contacting the manufacturer for advice on how to deal with hums and/or ground loop issues.
Edits: 08/07/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: SET headphone amp without hum? - genungo 11:22:29 08/07/16 (9)
- RE: SET headphone amp without hum? - aarocks 11:37:53 08/07/16 (8)
- RE: Less noisy SET headphone amps - genungo 12:15:07 08/07/16 (7)
- RE: Less noisy SET headphone amps - aarocks 06:26:07 08/08/16 (1)
- RE: Less noisy SET headphone amps - genungo 06:56:41 08/08/16 (0)
- Don't do it! - Triode_Kingdom 22:47:44 08/07/16 (4)
- I totally agree with you! - Cougar 21:15:04 08/09/16 (0)
- RE: Don't do it! - genungo 06:01:06 08/08/16 (2)
- RE: Don't do it! - Triode_Kingdom 18:59:01 08/08/16 (1)
- RE: "It only takes a split second to get electrocuted" - genungo 19:09:54 08/08/16 (0)