Amp/Preamp Asylum

After I bought the....

72.220.37.3

This Post Has Been Edited by the Author

In Reply to: RE: Updated Photo Of Completed PCB. posted by AbeCollins on December 12, 2024 at 07:12:44

First pcb back during covid and never got tfinish it, I bould a completely built unit from Zerozone. I then upgraded it after hearing it for awhile and not liking the minor issues with the sound. I did buy the 3rd and last PCB for the final "All Out Build" and source every single part on it. I sourced the best quality parts there were. I did change the RIAA components to Metal Film resistors and Silver Mica caps. All resistors are Wirewound that are using in the power supply and PCB.

The original kit I bought came with nasty caps and really bad resistors, the resistor leads were hollow, so when you tried to form the leads they would flatten out when the plyer were holding them. never ever seen that type of leads on a resistor. So that when I got the last PCB I sourced everything/parts from Mouser and Digikey.

Thank You for the kind words on the build. :)

Follow Ups: