|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
Hello Inmates!
I have had an original ServoStatik for a few years, and used it quite regularly for awhile. Unfortunately the high end on one of the panels went out not too long ago.
It didn't just cut out immediately - the high end volume level on the bad panel got lower and lower until one day it stopped. The orange light still comes on. Mid-range still sounds excellent.
Luckily I found a slightly beat-up spare panel on eBay at the beginning of the pandemic, so I can use this for practice. Its high end is suffering the same fate - about halfway gone now.
I'm no EE but I'm pretty good with a soldering iron, so I want to try repairing the spare panel and if that goes OK I'll repair the nice one. I don't have a schematic but it looks like there are a couple of easy-to-reach transformers that are obvious candidates for replacements. There are what appear to be some resistors and small capacitors that are coated with some sort of wax, hopefully I can avoid dealing with this.
If anyone has any suggestions on how to proceed with troubleshooting, or maybe even a schematic, please let me know. It looks fairly straightforward though.
The image URL should have the two photos showing the electronics, and I attached one of them to this message.
Thanks!
This post is made possible by the generous support of people like you and our sponsors:
Topic - Infinity ServoStatik - high end stopped working on one panel - pyite 10:47:02 03/08/23 (12)
- RE: Infinity ServoStatik - high end stopped working on one panel - kentaja 13:57:12 03/08/23 (10)
- RE: Infinity ServoStatik - high end stopped working on one panel - pyite 14:33:00 03/08/23 (9)
- RE: Infinity ServoStatik - high end stopped working on one panel - kentaja 13:42:22 03/09/23 (0)
- RE: Infinity ServoStatik - high end stopped working on one panel - triamp 03:47:00 03/09/23 (1)
- RE: Infinity ServoStatik - high end stopped working on one panel - kentaja 13:47:45 03/09/23 (0)
- RE: Infinity ServoStatik - high end stopped working on one panel - InfinityApogee 18:34:21 03/08/23 (5)
- RE: Infinity ServoStatik - high end stopped working on one panel - Atmer 18:50:39 03/31/23 (0)
- RE: Infinity ServoStatik - high end stopped working on one panel - Atmer 17:44:22 03/30/23 (2)
- RE: Infinity ServoStatik - high end stopped working on one panel - pyite 14:09:55 10/21/24 (1)
- RE: Infinity ServoStatik - high end stopped working on one panel - Atmer 19:14:06 12/07/24 (0)
- RE: Infinity ServoStatik - high end stopped working on one panel - kentaja 13:49:02 03/09/23 (0)
- RE: Infinity ServoStatik - high end stopped working on one panel - pyite 12:10:34 03/08/23 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
