K&K Audio / Lundahl Transformers Welcome! Need support, you got it. Or share youe ideas and experiences. |
|
In Reply to: RE: what CCS for a 6sn7 driver tube posted by KevinC on January 10, 2017 at 05:35:39:
Hi Kevin, i apologize for not being clear. The 6sn7 is driving just a single kt120 in each channel. And you are correct to say that i should put the ccs on the anode to replace the resistor, which is what i was trying to say in my original post. I wanted to know if there was a particular kit that you sold that was more reliable than the others? Also if it was necessary to mount the heatsink on the top of the chassis where the heat could dissipate in a relatively cooler environment or can it be mounted under chassis? thanks again
Edits: 01/10/17
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: what CCS for a 6sn7 driver tube - DAK 09:41:11 01/10/17 (2)
- RE: what CCS for a 6sn7 driver tube - JKT 11:39:07 01/10/17 (1)
- RE: what CCS for a 6sn7 driver tube - JKT 11:47:06 01/10/17 (0)