![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
81.198.222.40
I just got a pair on ebay, one of them flashes big time when I switch on the amplifier, the other doesnt, is that a problem ?
Antonio Melo Ribeiro
![]()
Follow Ups:
Lowrider,The Siemens E81CC is one of my three favourite 12AT7s- along with the Valvo 6201 and old Sylvania triple mica 12AT7WAs- but I've never seen a Siemens E81CC flash dramatically. I swap these in my microphone preamp for certain uses.
When two more or less identical objects in symmetrical positions behave differently, I'd first isolate the source. My suggestion would be to exchange the two positions and see if the exhibitionist tube flashes in the other socket. My impression is that tube flashing on startup is not in itself a problem, but intuitively, it seems they should behave similarly. Some tubes are enthusistic flashers while others are more circumspect. For example, it's difficult with the Sovtek 12AX7LPS to see it's even going.
Cheers,
I bought another E81CC with a similar getter as the one that flashes, two columns supporting the halo, the other has only one, and it flashes as well, must be that particular model ???
Antonio Melo Ribeiro
I switched them, and the flash moved to the other side too, so it is the tube...
Antonio Melo Ribeiro
![]()
Apparentely it is normal, at least is what I was told from 2 other knowledgeable sources...
Antonio Melo Ribeiro
![]()
| ||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: