 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
98.224.201.27
In Reply to: RE: Tangram Le' Journey Continues... posted by Tangram on April 13, 2024 at 05:07:35
Thanks Tangram.
It seems the combinations that worked out the best for me are in the following order, (1) pure silver at both ends of the cord (2) pure silver ac | copper iec (3) silver plated copper at both ends (4) silver plated copper ac | copper iec.
It once again came down to the key realization being which order each struck accord with me on an emotional level the most, as you've stated the wiring ( whatever offshoot brand it maybe? ) within the Accuphase 40th itself?, was done ( voiced ) right, and you're correct I no longer need to look any further cord wise, as this is good enough for me | then some.
I was thinking I'd have to go back and find your post on which type of plating or un-plated plugs you were using with your IC's, so thanks for mentioning they're in fact pure silver ones as well, in said case as I only own one of the five integrated amps that's is actually fully balanced that can be used with the everSOLO, I'll concentrate on getting a set of the Aeco pure silver RCA connectors as well..., as the Viborg ones are a tad more costlier than I'd like to spend.
Maybe at some point in the near future, I'd once again commission someone to solder said plugs onto my pair of Xangsane XS-9001 IC's?, as my skill set is solely lacking in this one area.
Truth is the Accuphase cord came out of curiosity | yet I've ended up with four of them here as well, might I ask which brands of subs you're using?, as I don't believe in using them, but am still curious about the options worth looking at?, for friends | associates that do, as a means of passing said information along.
It seems both of our journeys on said power cords have reached an end, where oh where do each of us go from here?.
Thanks again.
O_o
Follow Ups:
Very good el34, Iam using a Arendal dual opposed sub from Europe , it provides the foundation and integrates very musically with a dsp antimode device, I have now introduced my ten year old plus neodio dac with the Zidoo, where it is easily is in another universe than the Zidoo built in dac, and it should as it cost me back then, so now as it's connected via usb, I may explore a lhy audio usb reclocker @ 30 day trial period and see where that takes me. I too would like to possibly experience the dmp8 Eversolo , once I sold some items, however I will leave it at least some six months until some further batches are produced, having a built in anologue preamp is of high interest here. Maybe they will produce them in silver also !
Thanks for the update on your sub | as well as your plans on upgrading key equipment within your system, as my mind once again tells me it all begins at the source. I mean c'mon relying upon a $200 turntable or DAC ( music server ) as the beginning of one's chain driving say $30.000 speakers is beyond me. I'd far rather do like many had discovered back in the early 80s, by driving said a then pair of the original Wharfedale Dimonds with a Krell KSA 200, which would produce all sort of low end bass ( mid-bass ) rumbling from said speakers and was very very impressive to say the least.
I myself was looking into adding the Gustard Audio N18 ( silver | $389 ) Audiophile grade Ethernet Switch, but I'm somewhat torn between this and just adding two of the iFi Audio LAN iSilencers into the mix as well. As I too would think that even a 5-10 year old Neodio DAC could easily see many of the so-called modern DAC's upwards of $5000 off with ease as it's a very very stunning design to behold, of which I'd buy it alongside its matching integrated amp if I had the funds in a minute, such are the aesthetic appeal on my end, as I buy with both my ears | eyes it seems, i5 has to have a polished look even to gain access into our home.
I'd think it'd make sense to go to the Zidoo forum and make said suggestion for an option for silver finished products, provided it might be a sandblasted type, as the finish on several of the Denafrips DACs I've owned would showcase fingerprints | lint within the surface areas as if built in, which proved very difficult for me to clean, even after having purchased about 5 different aluminum cleaning agents to do so, but I've to get it up to the silver finished Gustard X20 Pro DAC, which was the best I had ( and have ) ever laid eyes upon, thanks again for your willingness to share this one with me Sondek, only thing was it taught me to avoid anything with digital readout, due to having had several DACs ( items ) displays become burnt out in areas within their screens which for me was definitely a no-no, regardless of sound, where it'd have made more sense had the manufacture made them where said displays could be cut off all together, as opposed to merely being dimmed, this burnt out shit still came through even in a darkened room.
So for me, it seems it's the digital side of things that require my attention | as always let the journey continue...-, I'll see you around.
Peace Be Onto You | Yours.
O_o.
| FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
||||||||||||||
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
