High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

Use this form to submit comments directly to the Asylum moderators for this forum. We're particularly interested in truly outstanding posts that might be added to our FAQs.
You may also use this form to provide feedback or to call attention to messages that may be in violation of our content rules.

You must login to use this feature.

Inmate Login

By default, logging in will set a session cookie that disappears when you close your browser. Clicking on the 'Remember my Moniker & Password' below will cause a permanent 'Login Cookie' to be set.

Moniker/Username: The Name that you picked or by default, your email. Forgot Moniker?	Examples "Rapper", "Bob W", "joe@aol.com".
Password:	Forgot Password?
	Remember my Moniker & Password ( What's this?)

If you don't have an Asylum Account, you can create one by clicking Here.

Our privacy policy can be reviewed by clicking Here.

Inmate Comments

From:
Your Email:
Subject:

Message Comments

Original Message

Line array and Passive Radiator?

Posted by npuls on August 20, 2007 at 15:50:59:
I built a knockoff pair of the partsexpress.com Kuse 3201s using 18 3" drivers in 8" pipe that was 6ft tall they are in a large area (in the hayloft of a barn) and they sound phenominal... I had some drivers left so I put them in a hexagon shaped enclosure about 3 ft tall and 6" on each side... I put 9 of the drivers on one side and they sound ok - I know that there is some low frequencies hanging out in there - Would you put a passive radiator in the bottom of a line array? I know very little about this and would like to learn... I currently have them ported but there is no rhyme or reason to the port - It just looked right