|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: How to properly disassemble and ship Empire 698 turntable??? posted by Mr Blue Sky on April 2, 2007 at 02:37:45:
In addition to what Phil said the dust cover needs to be boxed separately also of course. One other thing to watch for is the motor needs to be secured as it can easily rip right through the mounting grommets during rough handling. I had two Empire motors do this being shipped to me. Then the grommets are probably ruined and the motor is free to bounce around and break things. The wood bases are very weak especially at the corners so the base should have solid Styrofoam sheet built up around it. Also, don't let them tape anything directly to the tone arm or anywhere to the gold finish as it may mar the finish..
Dave
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: How to properly disassemble and ship Empire 698 turntable??? - DaveInVA 10:42:26 04/02/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
