Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

[ Follow Ups ] Thread: [ Display  All  Email ] [ Vinyl Asylum ]
[ Alert Moderator ]

The low output versions have a much larger magnet...

and suspension barrel. The o-ring is consequently larger on the low output versions as well.

This also causes the low outputs to ride lower in the back to get the same VTA setting on the stylus as with the high ouput versions.

Since the magent is larger and the suspension barrel is larger the cantilever is mounted lower on the aluminum body (which is the same for all models).

Since the cantliever is lower and the cantilever collar on the front piece is the same, the cantilever exits at a lesser angle than with the high ouput models.

I do know the colis are wound opposite on my Glider H2 and Ebony 3H, the signal is inverted between the two....both channels are in phase, just inverted.

This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  

Follow Ups Full Thread
Follow Ups
You can not post to an archived thread.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]