Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

RE: Finally moving on this budget eBay ROK L37

Haha. It gets easier if you have the 3 phase supply. There are only the 3 motor wires to worry about plugging into the supply. If it goes backwards , that just means you need to hook it up the other way. The thing with the L37 is there needs to be a way so all 3 phases get simultaneously activated by the big control knob/switch if I don't want to add a seperate power switch. An extra power switch seems lame since that isn't how it fuctioned from the factory. I think I could just have the equivalent of a contactor for each winding with some spare relays that would probably fit up in that plinth cavity.

I believe Vinyl Engine has the manuals, which have the factory wiring schematics, if you want to wire it up with the capacitor, and not have it run backwards (lol). The motor just does what you tell it so all you have to do is wire it up as shown in the schematic of the model you would like to emulate.


This post is made possible by the generous support of people like you and our sponsors:
  VH Audio  


Follow Ups Full Thread
Follow Ups
  • RE: Finally moving on this budget eBay ROK L37 - Ugly 15:47:35 01/01/25 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.