Question about ultrsonic cleaning

Posted by 13th Duke of Wymbourne (A) on November 28, 2024 at 16:01:27

I use a simple manual RCM vacuum machine that works well AFAICT. After cleaning, some discs have a few clicks and pops and I wonder if I was to add an ultrasonic step, or replace the RCM completely, would those clicks and pops disappear? I once took a fairly noisy disc to a show and had Kirmuss do his stuff and it didn't make a difference to the amount of noise or sound quality but I wonder if the occasional pops I get from an otherwise clean disc could be removed by ultrasonics.
I don't want to mess about with the generic ultrasonic bath + motorized skewer systems (e.g. Vevor) so I am thinking of a Humminguru or, even, a Degritter. Has anyone compared a Hummiguru to an RCM (or used the two in combination) and is a Degritter worth the extra over a Humminguru?

TiA

This post is made possible by the generous support of people like you and our sponsors:

Topic - Question about ultrsonic cleaning - 13th Duke of Wymbourne 16:01:27 11/28/24 (7)

I have some experience with US cleaning - Ross 08:17:44 12/21/24 (0)

my choice was the Degritter - hifitommy 22:32:15 12/03/24 (1)

RE: "in one swell foop" ? - peppy m. 05:03:44 12/04/24 (0)

RE: Question about ultrsonic cleaning - Sondek 08:18:10 11/29/24 (0)

My RCM Historical -- Partly - afro18 04:43:09 11/29/24 (0)

Good thing about skewer systems is that the separate parts can be replaced - alaskahiatt 23:08:32 11/28/24 (1)

RE: Good thing about skewer systems is that the separate parts can be replaced - Mick Wolfe 08:55:48 11/29/24 (0)

Question about ultrsonic cleaning

Post a Message!