Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Thank you. Sounds like I should just stick with my Power Wedge, as posted by alaskahiatt on May 15, 2024 at 13:06:13:
One thing to remember when talking about protection from Mains Power deviations, be they low or High, addressing surges - abnormally HIGH voltage is simple -
put a Thermistor in series with the line load-
Addressing Under voltage (aka Brownouts) is more of a challenge w/ out a true 'protection circuit' that will shut off the supply if the incoming voltage is below your set point - 120 VAC... typically involving some sort of sensor/or relay that has a narrow trigger band...
Happy Listening
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Thank you. Sounds like I should just stick with my Power Wedge, as - 6bq5 13:36:41 05/15/24 (1)
- This takes care of my brownouts nicely...-. - ABliss 19:57:24 05/16/24 (0)