Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

Good question!

Whatever I say at this point would be a guess. That is why I recommended to treat one junction at a time then listen, then tune/adjust. Then move to the next junction point and repeat.

In your case if I were you, I would start at the last junction point you think where the sonic improvement stopped and adjust from that point.

Think of it this way. After each junction point you treat there should be no sonic degradation, should be an improvement. Use what I said in the previous post to you as a guide for ground and hot side tuning.

From all the reports back from people around the world that have installed this tweak, they report preferring any where from .33 grams to 1 gram is best for them. All report after finding the correct amount to use for them, after every 1-3 installs, resolution in there systems increase until all junctions in their homes wiring is treated.

Probably it all depends on the amount of EMI/EMF that the homes wiring is exposed to, picks up and how sensitive the system is to the noise.

This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  

Follow Ups Full Thread
Follow Ups
  • Good question! - cdc 16:43:43 12/10/23 (0)
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]