RE: this is a good question

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

In Reply to: this is a good question posted by Story on September 22, 2022 at 16:29:51:

If I were to do resistor-on-board work? I'd use a removeable spacer UNDER the resistor to provide good stability while soldering while removing the spacer would admit air for cooling......

I've seen cheap boards turn to charcoal and become conductive. I've had to install 'dummy' traces to do emergency repairs for stuff which was NOT available. In some cases, I'd have like to have a board making kit available and remake some of those boards.

This was for semiconductor manufacturing equipment, not audio.....
Too much is never enough

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

Follow Ups Full Thread

Topic - replacing resistors.... - walkstoslow 10:56:01 09/22/22 (4)

RE: replacing resistors.... - walkstoslow 07:14:20 09/23/22 (1)

I've seen resistors with ceramic standoffs - Story 11:28:30 09/23/22 (0)

this is a good question - Story 16:29:51 09/22/22 (1)

RE: this is a good question - pictureguy 16:57:36 09/22/22 (0)

Follow Ups

RE: this is a good question - pictureguy 16:57:36 09/22/22 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.