|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Use Resistor to change speaker from 8 ohm to 4 ohm? posted by pictureguy on July 17, 2022 at 17:30:53:
The data sheet says the speaker is 15 ohms.
To get a 4 ohm load from a 15 ohm speaker the parallel resistor needs to be 5.5 ohms. The resistor will suck up most of the power.
That doesn't sound like anything I would do.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Use Resistor to change speaker from 8 ohm to 4 ohm? - Tre' 07:26:59 07/18/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
