Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

Re: Implementing Hammond choke 193L with balanced power at the wall receptical

Posted by jgdebelen@sbcglobal.net (A) on April 24, 2007 at 08:50:54

In Reply to: Re: Implementing Hammond choke 193L with balanced power at the wall receptical posted by audionutge@yahoo.com on April 23, 2007 at 14:58:38:

Just to clarify again. Alan, I too have a balanced a/c (60v/60v). Would the best way to implement the chokes be: one 193M at the primary side of the trasformer and one 193M on each of the outlets coming out of the secondary. ( i have four outlets coming from the balanced secondary, so i need four 193M for the outlets). Or would the 193L (instead of the 193M) be enough for each of the balanced outlets?
Also, with the chokes on each of the balanced outlets, will there be still a need to isolate the outlet for digital (from outlets for amp and preamp) or the choke is enough to filter the noise from digital gears? Thanks again.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---