|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Thanks so much. One more question posted by Frihed89 on August 6, 2007 at 00:31:20:
"One thought I had was to gently crimp some small spades on my bananas?"
So, now you are considering no less than three mechanical connections. Wire to banana...banana to spade...spade to amp terminal. Every one of those susceptible to oxidation, loosening and other failures.
Why not cut that down to one. Just screw the wire directly to the amp terminal, where the spade would go. There's no reason to put connectors in the way, unless it's to make it easier for girls to plug and unplug the speakers. Connectors are just for convenience and prettiness. They add resistance and decrease performance.
/// Speakers should all come with captive speaker wire included.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Go for fewer, not more, mechanical connections. - BFB 08:30:01 08/07/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
