|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: These look decent posted by Caucasian Blackplate on July 24, 2007 at 21:39:02:
CB is on to something here. Those caps in the bias supply are there to reduce noise from the diode switching. You actually can run the speakers without the caps. IIRC, the stator voltage is about 5,000 volts total, but I've never measured the voltage. The key is to have a little capacitance across the diode string. If you know the voltage you can use a larger cap with sufficient voltage across the entire string , too.
Stu
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: These look decent - unclestu52 21:49:14 07/24/07 (8)
- RE: These look decent - frogman 05:37:53 07/25/07 (6)
- RE: These look decent - unclestu52 11:26:18 07/25/07 (5)
- RE: These look decent - frogman 10:32:26 07/26/07 (4)
- Oh, they are snubbers? - Caucasian Blackplate 21:50:30 07/24/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
