|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Removing preamp o/p coupling caps posted by Wally on July 23, 2007 at 04:57:23:
You might also consider wiring up a Lundahl or some other type of solid state output transformer to get rid of that DC. Also, measure the DC at the output and see what you get. 100uf film caps will run you at lest 20 bucks each, and they are freakin huge, so they may have to be outside the chasis. Also verify that the caps in the amplifier are at the input, not somewhere upstream. If it was my setup, I would take the caps out of all of them and put some high quality films inline where they would fit.
-Paul
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Transformer - Caucasian Blackplate 22:32:59 07/23/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
