|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: You would still have a ground loop. posted by Al Sekela on July 3, 2007 at 15:13:22:
Thanks Al. This stuff gets pretty heavy for me, it's taking time for me to understant fully, but this explanation helps a ton.
I have a chassis ground point on the balanced power unit. How does this work? I saw in that Jensen paper that the solution was to run grounds off the chassis? is this done w/ just a bare copper wire that ties into a piece of grounded metal (not sure what i have available that i could use)...?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: You would still have a ground loop. - DC STEVE 08:33:07 07/04/07 (1)
- Not sure what the purpose of the ground point is. - Al Sekela 12:10:50 07/04/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
