Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Not quite.... posted by alan m. kafton on July 3, 2007 at 16:03:06:
"It would be most interesting to compare the Acrolink connectors (with P-and-C innards) with the M1 & F1, connected to identical cables. Then it would be down to comparing the outer shells themselves. I know I won't be doing this anytime soon. :--]"
I use the Golden Sound Acoustic discs on all of my AC connectors, male and IEC, due to the very beneficial decrease in material resonaces when applied.
I have A/B'd Marinco/Oyaide AC male connectors with/without their outer shells and there is very little discernable difference. The biggest detriment to an AC plug is the body in which the blades/ground pin are molded into. The Oyaides are miles ahead of the Marinco's which sound monotonous when AB'd with an Oyaide.
I have even gone so far as to remove the molded body itself and to solder the blades/ground pin to the power cord wires which was a VERY revealing experiment!! Only the Oyaides did the least amount of "sonic damage" when compared to no body at all. Adding a GS Acoustic disc to the outer barrel brought the Oyaides the closest to no body/outer barrel at all :-)
I am in no way associated with GS or Oyaide, just one VERY satisified customer and I can say this.........The GS Acoustic discs R a highly recommended AC tweak that provides very worthwhile benefits to AC plug/IEC bodies. They can be used in other applications as well, try one on your subwoofer dustcap :-)
Cheers,
~kenster
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Speaking of outer barrels/plug bodies............ - kenster 02:08:59 07/04/07 (1)
- RE: Speaking of outer barrels/plug bodies............ - alan m. kafton 11:17:11 07/04/07 (0)