|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
Hello!
Got a RIIA with a 4,7uF tant in the signal path (maybe 0,5 VDC on it), between the first stage and the correction stage. The RIIA stage is then coupled with a 10 uF bipolar elco (mV DC on it) in the signal path before it is connected to the rest of the preamp.
What can I expect if replacing them with 10uF Wima MKS2?
Cheers
This post is made possible by the generous support of people like you and our sponsors:
Topic - Wima film cap instead of BP or tant? - Zombie 23:28:01 06/19/07 (15)
- My Experience With Wima - 1973shovel 14:06:16 06/20/07 (0)
- Yes, go for it. - cheap-Jack 07:28:20 06/20/07 (8)
- RE: Yes, go for it. - Zombie 07:35:22 06/20/07 (7)
- Try to do what I did if space permits !!! - cheap-Jack 08:03:38 06/20/07 (6)
- Why care about esr in coupling caps? - Slider 09:38:08 06/20/07 (5)
- Sonics is subjective - cheap-Jack 12:02:38 06/20/07 (4)
- I thought Wimas were stacked film caps - nightdoggy 19:02:46 06/21/07 (3)
- They do make stacked film caps ... - Slider 21:43:30 06/21/07 (2)
- Stacked film - nightdoggy 10:17:06 06/25/07 (1)
- wound isn't really any more inductive - Slider 11:47:48 06/25/07 (0)
- RE: Wima film cap instead of BP or tant? - fmak 01:05:30 06/20/07 (4)
- RE: Wima film cap instead of BP or tant? - Zombie 01:06:57 06/20/07 (3)
- RE: Wima film cap instead of BP or tant? - fmak 08:30:07 06/20/07 (1)
- RE: Wima film cap instead of BP or tant? - nightdoggy 08:54:01 06/20/07 (0)
- RE: Wima film cap instead of BP or tant? - nathb 04:32:15 06/20/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
