|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Capacitor Orientation posted by Tweekeng on May 29, 2007 at 19:43:09:
Assuming that -V is the negative voltage rail, you should orient the capacitor with the green lead (outside foil) towards ground (-V). the Red or inside foil is the input side or +V. Current flows from positive to negative and the leads color code it from inside foil (+V or red) to outside foil (-V or green). Hope that this helps you out. This is the same orientation that you should install the capacitors for audio signal flow also.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Capacitor Orientation - Constrained 1 20:49:55 05/29/07 (7)
- RE: Capacitor Orientation - Dave Garretson 04:58:43 05/30/07 (6)
- RE: Capacitor Orientation - Jim McShane 06:19:47 05/30/07 (5)
- RE: Capacitor Orientation - Schu 10:47:38 05/30/07 (4)
- RE: Capacitor Orientation - Jim McShane 06:23:27 05/31/07 (3)
- RE: Capacitor Orientation - Schu 10:00:02 05/31/07 (2)
- RE: Capacitor Orientation - Jim McShane 10:58:08 05/31/07 (1)
- RE: Capacitor Orientation - Schu 11:48:18 06/01/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
