|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Also... posted by Duster on May 11, 2007 at 18:36:08:
On split duplex outlets I make it a point to jumper over the two duplexes. Usual NEMA codes have four insertion holes for wiring on the back. I stagger the input hot and neutral, and then use the adjacent holes to jumper over the stock skinny bridge. I find that using the split duplex in this manner will give greater cross sectional area of the connection between the two duplex outlets.Bridging the duplex does make a sonic difference in my experience.
Stu
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Also... - unclestu52 14:37:31 05/12/07 (3)
- Re: Also... - alan m. kafton 17:09:16 05/12/07 (2)
- Re: Also... - unclestu52 17:59:26 05/12/07 (1)
- Re: Also... - HumanMedia 20:55:32 05/14/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
