Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
Here in Tokyo I don't have a ready source of Hammond Series 193 chokes (that I know of). There are a few inexpensive candidate chokes being sold on a local internet auction site that I’d like to ask about. First, the one shown below weighs 7kg (15 lbs+), and the only information I have about it is what is visible in the photo. My primary concern is that I have no idea what the maximum operating voltage is. Obviously, one way to find out if it works is to plug it in and see whether it results in a fire. However, it occurs to me that perhaps there might be a more intelligent approach to take before I go stuffing "mystery meat" into my AC line's digestive tract.ANY ADVICE WOULD BE GREATLY APPRECIATED. If I’m just asking for trouble by messing with this, I’ll pass. The price is about US$15.
Another item (http://img292.imageshack.us/img292/7361/kamasho01img600x4501173zy5.jpg) is a 9kg (20 lb) "AC Reactor" that was made in 2002 and has never been used. This is a three-phase device built around a nice laminated steel core. (I'm assuming that there are ways of using three-phase devices on single-phase lines.) This is marked as follows --
Insulation: B
Hz: 50/60
Line: 400/440V, 200/220V
A: 140
mH: 0.049
The price is about US$26If either of these devices might be worth messing with for AC power line conditioning and/or noise filtering, I would greatly appreciate some advice on how to approach.
Thanks!
Chris
This post is made possible by the generous support of people like you and our sponsors:
Topic - In lieu of a Hammond Series 193 choke . . . how to test this safely? - Christopher Witmer 17:28:42 04/27/07 (3)
- ***BE VERY CAREFUL*** - Al Sekela 21:48:41 04/27/07 (2)
- Consider the idea scrapped -- I'll use the right tool for the job - Christopher Witmer 23:56:17 04/27/07 (1)
- Re: Akihabara, main drag - grinagog 00:11:57 04/28/07 (0)