Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

Re: Anyone replaced IEC inlet in PS Audio UO ?

Posted by Duster (M) on April 24, 2007 at 11:48:10

In Reply to: Anyone replaced IEC inlet in PS Audio UO ? posted by michaelv20850 on April 24, 2007 at 10:03:28:

I replaced a PS Audio UPC-200's (essentially a dual bank UO) stock nickel plated IEC inlet with a Furutech INLET(G) IEC inlet. It's a perfect fit, so there was no need to enlargen the opening. Rather than use the stock push-on connectors, I soldered the wires to the IEC inlet's solder tabs. Since I replaced the stock AC outlets at the same time as the stock IEC inlet, I can't really comment on any particular sonic betterment due to the upgraded IEC inlet, alone.

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---